The work flow of the thread locking machine: page building, page input, positioning, thread locking and book writing. The main components of the machine body are the page-lager and the thread-locking machine.
The pager puts the book post on the guide rail of the conveyor chain, pushes the book post to the book delivery wheel, and the book delivery wheel rotates at high speed to deliver the book post to the bookshelf.
After receiving the bookshelf, the bookshelf is swung to the lock line position. At the same time, the buffer and the pull gauge installed on the bookshelf buffer and position the bookshelf. Subsequently, the bottom installed under the bookshelf is perforated for the bookpost, the threading needle moves downward under the drive of the lifting frame, and the hook claw and the hook needle cooperate to tie and tighten.
After the thread locking is completed, the book post will be sent to the desk by knocking the book stick and the book board. At this time, the book blocking needle will block the book post to prevent the book post from going backwards and complete the thread locking process of a book post.
After a book is locked, the counter controls the page jumper to idle for one week, I .e. no book post is sent but the thread locking action is still carried out once. At this point, the line originally hidden in the crease of the book becomes a bright line due to the cover of no pages. In the process of pushing the book post backward, the hook of the last post is locked into a dead knot, the open line is cut by the cutting knife 10, and the core of a book is locked.